Pool Inspection — Lakeway, TX

Pool Inspection in Lakeway, TX

Buying a home in Lakeway with a pool? Before you sign, you need to know what that limestone well water has done to the equipment. The Pool Police inspects pools across Hills of Lakeway, Flintrock Falls, and the surrounding 78734 and 78738 properties — and in this market, the heater and salt cell tell the real story. Well water that tests above 400 ppm calcium hardness lays down scale inside heat exchangers and on cell plates, quietly stealing years off equipment a seller may never have disclosed. We pull the numbers: heater and pump age, remaining useful life, and how hard the scale has hit. Many Lakeway pools are also built into hillside rock, so we trace the plumbing for leaks and restricted flow where access is tight, check the shell for cracks and settlement, and verify electrical bonding and GFCI protection. You get a written report with photos within 24 hours, on real-estate-deadline timing. We don't sell renovations, so what we find is exactly what's there — no inflated repair list, no soft-pedaling a worn-out heater to keep a deal moving.

Typical Pricing$150–$275 per inspection, written report delivered within 24 hoursPre-purchase (home-buyer) inspections include a prioritized repair list with cost ranges. Complex pools with spas, water features, or automation may price higher.See full pricing guide →
What's Included

What We Do

Inspect the pool shell for cracks, delamination, staining, and structural settlement
Evaluate all equipment — pumps, filters, heaters, salt systems, automation — for age, condition, and remaining life
Check plumbing lines for leaks, restricted flow, and code compliance
Review electrical connections, bonding, and GFCI protection for safety
Assess decking and coping for trip hazards, drainage issues, and expansion joint condition
Deliver a written inspection report with photos, findings, and prioritized repair recommendations
Why Choose Us

Why The Pool Police?

25+ years of pool knowledge — we know what fails first and what can wait
Unbiased reporting — we don't sell renovations, so our findings are objective
Detailed written report with photos, delivered within 24 hours of the inspection
We explain everything in plain language so you can make informed decisions
Available on short timescales to meet real estate transaction deadlines
On the Ground in Lakeway

Local Conditions We Account For in Lakeway

Every pool inspection visit in Lakeway is calibrated to the conditions that make pools here different — not a generic checklist:

Limestone-fed source water causes rapid calcium scale buildup on tile and equipment
Lake Travis proximity brings higher humidity and accelerated algae growth
Many pools are built into hillside rock, making plumbing access difficult
Deer and wildlife debris from surrounding green belts
Two different water utilities across the same city — Lakeway MUD and Travis County WCID 17 — plus private wells, so no single chemistry plan fits every address
Heaters and salt cells are common in Lakeway builds, and both are exactly what hard water destroys first
Service Area

Neighborhoods We Serve in Lakeway

Hills of LakewayFlintrock FallsLakeway proper7873478738
Common Questions

Frequently Asked Questions

How much does pool service cost in Lakeway, TX?

Weekly pool service in Lakeway runs $195–$385 per month as a flat rate with all chemicals included — no separate chemical bill and no contract. Most standard Lakeway pools (10,000–20,000 gallons, no spa, no water features) fall in the $195–$265 range; hillside builds with integrated spas, vanishing edges, or heavy water features land at $285–$385. One-off work is priced separately: leak detection $295–$495, green pool recovery $385–$950, and a pre-purchase pool inspection $150–$275.

Why does my Lakeway pool get white scale buildup so fast?

Lakeway sits on the Edwards Plateau limestone formation, and everything the water touches on the way to your pool adds calcium. Treated water from Lakeway MUD or Travis County WCID 17 runs roughly 188–222 ppm hardness — moderately hard to hard. Private wells in the 78734 and 78738 area are far more aggressive, commonly 400–650 ppm. Above about 400 ppm, calcium precipitates out as white scale on tile, inside heaters, and on salt cell plates. The fix is proactive: keep calcium hardness, pH, and alkalinity inside a saturation index that keeps the mineral dissolved, and use a sequestrant during the hottest evaporation months rather than scrubbing scale off after the fact.

Is Lakeway water different from Austin city water for pools?

Yes, and it is the single most common reason a pool service that works elsewhere in Austin underperforms in Lakeway. Austin Water runs roughly 150–260 ppm calcium. Lakeway is served by Lakeway MUD and Travis County WCID 17 at 188–222 ppm, and private wells in the same ZIP codes can be double that. A generic Austin chemistry plan applied to a well-fed Lakeway pool will scale the tile line within a season. We test your actual source water on the first visit and build the plan from that number, not from a metro average.

Do you service Hills of Lakeway and Flintrock Falls?

Yes. We have established routes through Hills of Lakeway and Flintrock Falls every week, and we service Lakeway proper across both the 78734 and 78738 ZIP codes. Flintrock is inside the WCID 17 service area, so those pools generally see treated-water hardness rather than well-water hardness. Lakefront pools in the Rough Hollow community have their own dedicated service approach — see our Rough Hollow page for details on the specific challenges of those newer luxury builds.

What day of the week will my Lakeway pool be serviced?

The same day every week. We run established Lakeway routes rather than dispatching whoever is free, so you get a consistent day and, in almost all cases, the same technician. That matters more than it sounds: a tech who has seen your pool 40 times notices a failing salt cell or a slow leak weeks before a rotating crew would. You do not need to be home — most Lakeway customers give us gate access, and a written service report lands after every visit.

Do you handle pools built into hillside rock in Lakeway?

Regularly. A large share of Lakeway pools are cut into limestone on a grade, which means equipment pads sit well above or below the pool, runs are long, and buried plumbing is in rock rather than soil. That changes leak detection in particular — pressure testing and electronic listening do most of the work, because you cannot simply excavate to look. It also changes pump sizing and priming behavior. We have worked these builds since 2000 and quote them from experience rather than guessing.

How fast can you get to a Lakeway pool for an emergency?

Lakeway is a core part of our service area, not an outlying stop, and we are based in the 78734 area ourselves. For existing customers, urgent issues — a pump that has stopped, a rapidly greening pool before guests arrive, a suspected leak dropping the water line — are typically handled same day or next day. Call (512) 300-4136 and you will reach the business directly rather than a national call center.

Do you require a contract for Lakeway pool service?

No. The Pool Police has never required a contract in 25+ years. Lakeway service is month-to-month at a flat rate, chemicals included, and you can cancel any time with no fee and no penalty. That is deliberate — we would rather keep customers because the water looks right than because they are locked in.

Who actually services my pool — the owner or a subcontractor?

The Pool Police is family-owned and has been since 2000. Owner Keith Mallette is a Certified Pool Operator (CPO) through the Pool & Hot Tub Alliance and personally oversees every Lakeway account. We are not a franchise and not a gig-worker app, so the person at your pool is our employee and the person answering the phone knows your pool.

Do I really need a pool inspection when buying a home?

Absolutely. A general home inspector checks that the pool holds water and the pump turns on, but they rarely evaluate equipment age, plumbing condition, or surface life remaining. Pool repairs can easily run into five figures — a dedicated inspection helps you negotiate or budget before closing.

What does the inspection report include?

Our report covers the pool shell condition, surface and tile assessment, all equipment with estimated remaining lifespan, plumbing and electrical review, safety compliance, decking condition, and a prioritized list of recommended repairs with approximate cost ranges.

How long does a pool inspection take?

A thorough inspection typically takes 60 to 90 minutes on site. We deliver the written report with photos within 24 hours. For urgent real estate transactions, same-day reports are available on request.

Ready to Get Started?

No contracts, no hidden fees. Just reliable, professional pool service from a family that's been doing it for 25+ years.

(512) 300-4136